Mit dem 1602TRX-SAT können Sie HDMI
und Audio übertragen. Dieses Daten können über ein einziges CAT5e/6/7-Kabel bis
zu 100m übertragen werden. Sie haben RS-232, IR und USB-Anschlüsse. Der
Empfänger wird vom Transmitter mit Strom versorgt.
This HDMI and Audio over Single CAT5e/6/7 Transmitter and
Receiver set can send uncompressed
audio/video along with control signal and IP data over a single run of CAT5e/6/7
cable up to 100m. It has the added benefit of control through the built-in RS-232
and IR ports. Additionally it has a LAN serving connection and external
digital & analog audio connections that gives users the convenience of
additional audio connections. The 48V PoE (Power over Ethernet) design can power
the Receiver (PD) from the Transmitter (PSE), eliminating the need for a
separate power supply for the Receiver.
- Supports HDBaseT 2.0 specification over a single CAT6/7 cable up to 100m/328ft and CAT5e cable up to 90m/295ft
- Fully compliant with HDMI (3D & 4K2K@60Hz with YUV420 supported), and compatible with HDCP 2.2
- DVI compatible
- HDBaseT 5Play? convergence: high-definition Video and Audio, 100BaseT Ethernet, PoE and Control (Bidirectional IR/RS-232 passthrough)
- Supports passthrough of high-definition audio formats: LPCM2/5.1/7.1CH, Dolby Digital 2~5.1CH, Dolby Digital Plus, Dolby TrueHD & DTS-HD Master Audio
- Supports 10/100 Mbps Bidirectional LAN connection
- Supports external analog and digital audio transmission
- Supports RS-232 baud rates: 110~115200bps
Inputs | 1x HDMI [1x Uncompressed AV and Data] 3x 1-Pin Terminal Block [1x Stereo (L/R)] 1x RJ45 [1x LAN Serving] 3x 1-Pin Terminal Block [1x RS-232] 1x 3.5mm Stereo mini-jack [1x Infra Red Receiver] |
Outputs | 1x RJ45 [1x HDMI & Propriety Data] 1x Toslink [1x OPTICAL 2 Channel LPCM / Dolby Digital / DTS] 1x 3.5mm Stereo mini-jack [1x Infra Red Emitter] |
PSU: | 48V/0.83A |
Dimensions | 183mm [W] x 80mm [D] x 16mm [H] |
Net Weight | 354g |